This 100w high-quality Flexi solar panel roof and kit enables the solar panel to be professionally fitted to the roof of a caravan, motorhome or yacht.
Size 1000 x 665 x 4mm
The most popular panel in the Callidus Stocked Flexi range, the 100w is fitted as standard by many of the UK’s leading boat builders, campervan, caravan and motorhome manufacturers. Benefitting from a five-year product warranty, the 100w panel will deliver up to 650wh per day, which is enough to keep users self-sufficient without the need for a mains connection even if using a larger capacity 104Ah battery. Supplied with all you need to fit the panel including a 10Ah dual battery charge controller, cable feed gland, bonding agent, a 4m cable, connectors, fuse and detailed installation instructions.
Callidus Flexi solar panels are the ultimate choice for flat or slightly curved surfaces.
Benefit from the semi-flexible panel's self-healing top surface
The ETFE top layer gives the Flexi panel extra resilience in really tough conditions. ETFE has a memory effect or self-healing capacity in the event the panel comes into contact with branches etc, thus ensuring any slight abrasions are ‘healed’ within a few hours. The Flexi range can even be walked on with soft deck shoes! During production, the ETFE is dimpled to further protect the panel and provide an anti-slip surface, particularly useful if the panel is fitted to a boat deck.
Each panel is assembled to ensure complete encapsulation. This ensures the six layer heavy duty laminate protects the solar cell circuit from extreme conditions. The junction box is also injected with special silicon, guaranteeing no water ingress.
Cells protected from hot spots
Where used on a camper van or boat, partial shading of a solar panel is typical. In these circumstances, heat build-up and damaging hot spots can occur leading to a significantly reduced life cycle of the panel. The larger 60w and above PV Logic flexi panels have up to two shading diodes housed within the fully waterproof junction box to prevent this occurrence.
There are no square edges on a flexi solar panel! Rounded panel corners and a unique curved junction box provide superior adhesion, no snag lamination and no sharp edges. The junction box is mechanically fixed in addition to being bonded to the panel. Strain relief is provided for the fitted 4m UV stabilised PV cable ensuring it cannot be accidentally pulled from the junction box.
The flexi range can be bonded to flat or slight curved surfaces (3cm curve per metre) such as painted aluminium, metal, GRP and fibreglass using Simson ISR 70-03. The aluminium layer is also pre-drilled with 4.5mm holes should the panel need to be mechanically fixed as well as or instead of bonding. All solar panels come with a five year warranty.
Please only use the glue pattern below (this is covered in more detail in the instructions), which ensures airflow under the panel is achieved preventing heat build-up and potential warping under extreme heat.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.