Victron Energy Blue Smart IP67 Waterproof Battery Charger - 12V 7A (1 Output)

Performance & Electrical Specifications

• Charge Current, Normal Mode: 7 A
• Charge Current, LOW Mode: 2 A
• Efficiency: 93% (Setting a new industry standard by wasting 3-4 times less heat)
• Nominal Input Voltage: 220–240 VAC
• Input Voltage Range: 180–265 VAC
• Frequency Range: 45–65 Hz
• No Load Power Consumption: 0.5 W

Charge Voltages (12V System)

• Absorption: Normal: 14.4 V | High: 14.7 V | Li-ion: 14.2 V
• Float: Normal: 13.8 V | High: 13.8 V | Li-ion: 13.5 V
• Storage: Normal: 13.2 V | High: 13.2 V | Li-ion: 13.5 V

Functional Features

• Bluetooth Smart Enabled: Monitor voltage and current, change settings, and update the charger wirelessly via the VictronConnect app.
• Adaptive 5-Stage Charge Algorithm: Bulk – Absorption – Recondition – Float – Storage. The microprocessor-controlled management system automatically optimizes the charging process relative to battery use.
• Storage Mode: Kicks in after 24 hours of no discharge to reduce float voltage to 13.2 V, minimizing gassing and corrosion. Once a week, it raises voltage back to absorption level to 'equalize' and prevent stratification.
• Li-ion Battery Support: Uses a specific bulk – absorption – float algorithm for lithium batteries.
• Deeply Discharged Recovery: Will initiate charging even if the battery has been discharged to zero volts and can reconnect to Li-ion batteries with internal disconnect functions.
• Power Supply Function: Can be used to power DC loads without a battery connected.
• LED Indicators: Features a Yellow LED for charge stage (Bulk, Absorption, Float, Storage) and a Green LED for power status.

Protection & Environmental

• Integrated Protections: Battery reverse polarity (fuse), output short circuit, and over-temperature.
• Temperature Performance: Protected against overheating. Output current reduces as temperature increases up to 60°C, but the charger will not fail.
• Operating Temperature Range: -20°C to +60°C (Full rated output up to 40°C).
• Humidity: Up to 100%.

Mechanical Specifications

• Enclosure Material: Aluminium (Blue RAL 5012)
• Protection Category: IP67 (Waterproof and shockproof)
• Dimensions (h x w x d): 85 x 211 x 60 mm
• Weight: 1.8 kg
• Battery Connection: 1.5-meter black and red cable.

Standards & Compliance

• Safety: EN 60335-1, EN 60335-2-29
• Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2
• Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3